Live Help

Causes of Lower Water Pressure

If you ever begin to experience a decrease in water pressure, the trouble will often be inside of your plumbing system. Below are several of the common factors to consider whenever troubleshooting a low pressure condition.

Obstructed Aerators
If the low pressure is coming from a certain faucet, your situation might be a stopped up or impeded aerator. Remove the faucet, and check out the aerator screen for corrosion, debris, lime buildup along with other blockages which has been limiting water flow. In some circumstances it may be advisable to simply just clean or remove and replace the aerator altogether.

Low Pressure in Hot Water
If your decrease in water pressure may seem to only be impacting on the hot water, there may be problems with the water heater. Inspect the shutoff valve next to the water heater, ensuring it is completely opened up. You may need to consult an accredited plumbing technician to be sure of the healthiness of your water heater and find out if it’s causing problems with low water pressure.

PRV (Pressure Reduction Valve)
If the low water pressure problem is present all through the house, you should examine your PRV. This may be a bell shaped component, and it’s normally located near where the line comes into the house. If your PRV valve is incorrectly readjusted or fails, it can result in a pressure loss, or possibly no water supply to the residence.

Shut off Valve
Numerous family homes and companies use a main shutoff valve. The vicinity can vary, but a majority of the time it will probably be located in an independent box linked to the water meter or next to the PRV. This kind of valve, which lets you shut down the water flow to your home, can restrict the steady flow if it’s not entirely open. Although just a little closed, this shut-off valve can decrease flows and reduce the water pressure.

Mineral Deposit Buildup
When it comes to older households, plumbing like galvanized water pipes can often be seen. Ultimately, mineral deposit buildup can build on the inside of the water pipe and so decrease the inner diameter of the water pipe, plus making the interior surface of the pipe rough. Even though this corrosion does not cause a health concern, this may minimize your steady flow and water pressure. In the event you discover this as the source of the difficulty, your only option is to upgrade the plumbing in the house by getting a copper or PEX repipe.

Water System Demand
If your pressure feels a bit lower at specific times of the day, you’ll probably be seeing the consequence of peaking demand of the water system. One can find commonly 2 peak instances every day. Some may be first upon waking when so many people are getting prepared for school or work. One other is the evening hours when we have gotten back at home from working. During that time they are often washing clothes, taking a shower, or watering their lawns. Within these times, you might notice a pressure drop, even so you should have acceptable water so long as you do not in addition have one of several factors outlined in one of the other troubleshooting procedures.