Live Help

Seal Beach CA repipe specialists

Seal Beach PEX-Copper Repipe and Slab Leak Repairs

A repipe is a process where the old pipes in your home or a building are upgraded with new ones. All water pipe fittings, supply lines and water valves are swapped. this normally makes for a lot better water pressure and more favorable water quality.

Should I Repipe our house in Seal Beach, CA?

There are many reasons why a person may want to replace the water lines of your home.

For households with galvanized piping:

Galvanized water pipes are located in houses built through the 1970′s. A galvanized pipe is an iron water line which is coated with zinc to be protected from corrosion. Nevertheless the zinc coating slowly and gradually wears away over the years exposing the iron material, along with oxidation build-up.

Recognizable Slab Leak Signs:

Low Water Pressure – The reason why could possibly be the restriction in the water flow caused by rust and corrosion buildup inside the galvanized water pipe.

Rust Colored Water – Corrosion usually goes into the fixtures. This indicates a highly developed stage of rust in the water lines.

Leaky Water Pipes – Leaks are most frequently a consequence of corrosion of the galvanized iron pipes. Concealed leaks may develop in the walls, within the attic and underneath the home, building up the possibility of severe damage to the home and property.

For homes with polybutylene water pipe:

This kind of plastic water pipe was regularly used from the mid 70′s to the early 90′s. It had been thought of as the next great plumbing improvement for piping and fittings. Polybutylene water line systems had been installed in millions of houses prior to being listed as highly substandard. Just about 65% of houses constructed during this timeframe still has this form of water pipe in the house.

Polybutylene water pipes have a very brief life span, because compounds in common city water makes it turn hard and develop into brittle. The fittings normally burst open first, followed by the water pipe itself.

Polybutylene pipes consist of flexible plastic pipe, gray when used inside and black or blue for outdoor usage. Many fittings are made with both plastic and metal. Insert fittings are used to join pieces of polybutylene pipe.

For homes with copper plumbing located in the slab.

Slab leaks are caused by copper or any other piping becoming corroded from certain soil and water conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water leaking through your foundation.
  • Water is running even when the faucets are off.
  • Your water meter displays water running despite the fact that the water is shut off.
  • Very excessive monthly water bills.
  • Neighbors have experienced a leaking slab.
  • You have experienced a slab leak before.

Best things about Copper Repiping

  • Significant water pressure
  • Get rid of rusty or foul tasting water
  • Really clean, clear water
  • Having the capability to use several faucets at once
  • Extremely high quality plumbing with no more leaky water lines.
  • No scalding skin in your shower if someone else turns on a faucet or flushes.
  • Increased satisfaction when your piping system is protected.
  • Favorable selling feature for the property.

When you employ a plumbing service or other company to perform the job, it’s most likely going to cost you more in the long run if you consider that you will have to employ a drywall repair business to replacement patch over the numerous repair points. Whenever you seek the services of a repipe business that features a master patcher on staff such as Repipe Specialists, you’ll never be required to invest extra money or valuable time getting the home back to normal. From start to finish, the PEX and Copper repiping operation requires only a few days.